Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
6es7241 1ch31 0xb0-0

Siemens SIMATIC S7-1200 Series

Home >  Products >  PLC >  PLC for Siemens >  Siemens SIMATIC S7-1200 Series

6ES7241-1CH31-0XB0

If you need other models or have any questions, please feel free to contact us, and we will reply to your message in a timely manner.

Brand:
Siemens
Spu:
6ES7241-1CH31-0XB0
Appurtenance:
  • Overview
  • Recommended Products

The 6ES7241-1CH31-0XB0 is a Siemens SIMATIC S7-1200 communication module, specifically the CM 1241 RS422/485 variant, designed to add a serial interface to S7-1200 CPUs for point-to-point communication.

Interface & Protocols

  • Physical Interface: 1 × RS422/485 port, 9-pin Sub-D connector.

  • Supported Protocols: Modbus RTU (Master/Slave), USS (Master), and Freeport (message-based, user-programmable).

  • Wiring Schemes: Supports 2-wire RS-485 (half-duplex) and 4-wire RS-422 (full-duplex).

  • Data Rate: 300 bit/s to 115.2 kbit/s.

  • Max. Cable Length: 1,000 m (shielded cable).

  • Isolation: 500 V AC for 1 minute (RS485 signal to CPU logic).

Electrical & General

  • Supply Voltage: 24 V DC (permissible range: 20.4–28.8 V DC).

  • Current Consumption: Typically 80 mA (max.) from the 24 V supply; 220 mA (max.) from the 5 V backplane bus.

  • Power Loss: 1.1 W (typical).

  • Dimensions (W × H × D): 30 mm × 100 mm × 75 mm.

  • Protection Class: IP20.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
6es7241 1ch31 0xb0-2
6es7241 1ch31 0xb0-3

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000