Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
6gk7542 5fx00 0xe0-0

Siemens SIMATIC PN/CAN LINK Series

Home >  Products >  PLC >  PLC for Siemens >  Siemens SIMATIC PN/CAN LINK Series

6GK7542-5FX00-0XE0

If you need other models or have any questions, please feel free to contact us, and we will reply to your message in a timely manner.

Brand:
Siemens
Spu:
6GK7542-5FX00-0XE0
Appurtenance:
  • Overview
  • Recommended Products

The 6GK7542-5FX00-0XE0 is a Siemens SIMATIC NET Communication Processor CP 1542-5, designed to integrate SIMATIC S7-1500 controllers into a PROFIBUS DP network. It is a compact single-width module for S7-1500 racks, and Siemens lists this specific firmware version (V2.0.5) as a spare part, with a successor variant (6GK7542-5FX10-0XE0, firmware V3.0) available.

 Interface & Protocols

  • PROFIBUS Interface: 1 × RS485, via a 9-pin Sub-D female connector.

  • Transmission Rate: 9.6 kbit/s to 12 Mbit/s.

  • Operating Modes: DPV1 Master or DP Slave.

  • Supported Communication: S7 communication, PG/OP communication, time synchronization, and diagnostics.

  • Data Throughput (Address Area):

    • As DP Master: Up to 2,048 bytes for inputs and 2,048 bytes for outputs.

    • As DP Slave: Up to 240 bytes for inputs and outputs.

  • Max. DP Slaves (as Master): 32.

  • Isochronous Mode: Not supported.

 Power & Consumption

  • Supply Voltage: 15 V DC from the S7-1500 backplane bus (tolerance: ±3%). The PROFIBUS interface does not provide 24 V DC output.

  • Current Consumption: 0.1 A (typical) from the 15 V backplane bus.

  • Power Loss: 1.5 W.

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
6gk7542 5fx00 0xe0-2
6gk7542 5fx00 0xe0-3

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000